Vinyl Siding and Clorox Dressing Your Home

June 12th, 2011 by admin

Vinyl Siding and Clorox

Vinyl siding is probably the easiest to maintain if it is installed properly by the siding professionals. Although proper installation can avoid mold and rot and you choose vinyl siding for its clean look, vinyl siding might start to look dull and dirty over time. It is recommended to power wash your home’s siding every two years or more often. Remember to repair any damage to the siding before you power wash it because the damage will worsen if you don’t. A few things to note before you start washing is the correct amount of pressure to be used, correct spray tip and the correct cleaning detergent.

Clorox has been widely used to identify any brand of household bleach. Although detergents can be used to clean vinyl siding, Clorox is much more effective for removing mold and stubborn stains. The elements might make your home look dingy and unkempt. Thus, Clorox is the best remedy if you want to restore the attractive appearance of your home. The tough vinyl siding actually responds well with Clorox bleach, provided it is properly diluted with water. In fact, bleach is the best solution to get rid of mold on your vinyl siding. The best water-bleach ratio is 5 parts water to 1 part bleach. Although vinyl siding is very solid, you need to rinse the bleach away immediately and quickly since bleach is highly corrosive.

Other than being effective, bleach is also economical. By diluting one gallon of bleach with 5 gallons of water, you will have six gallons of cleaning solution to clean your house with. Since bleach disinfects and sanitizes, any leftover solution can be used to clean your non-porous surfaces. With these characteristics that the bleach possesses, your home’s exterior can combat viruses and many other different bacteria. With the proper procedures, Clorox will not damage your vinyl siding and just might be your best bet in cleaning your vinyl siding.

Dressing Your Home